If a scanned image appears distorted or blurry, try
these solutions:
- Make sure
your original is not wrinkled or warped. This may prevent the
original from laying flat on the scanner glass.
- Do not move
your original or your product during scanning.
- Your product
will not operate properly while tilted at an angle. Place it on a
flat, stable surface that extends beyond the base of the product in
all directions.
- Adjust these
Epson Scan settings (if available) and try scanning again:
- Select the
Unsharp Mask setting.
- Adjust the
Auto Exposure setting.
- Increase the
Resolution setting.