The  power light is on |
The printer is turned on. |
| The power light is flashing |
The printer is busy. Wait for the
power light to stop flashing
before turning off the printer. |
The  paper light is on |
Paper may be out. Load more paper in the
cassette and press the paper feed button to
continue. |
| If multiple sheets have fed, press the
paper feed button to
eject the paper. |
| The paper size selected may not match any of
the sizes set for the paper sources. Press the paper feed button to
clear the error, and select the right paper size. |
| If the paper cassette is not installed, install
it and press the paper feed
button. |
| The paper light is
flashing |
Paper has jammed in the printer. Check in the
cassette, inside the printer, and in the duplexer to remove the
jammed paper. Then press the paper feed button to
clear the error. |
The power,  ink out, and
paper light are
flashing |
The cover is open. Close the cover. |
| An ink out light is
flashing |
An ink cartridge is low. Make sure you have a
replacement cartridge. |
| An ink out light is
on |
An ink cartridge is expended or not installed
correctly. Replace the indicated cartridge. Make sure the cartridge
is installed correctly |
| All lights are flashing |
Printer error. Check in the cassette, inside
the printer, and in the duplexer to remove the jammed paper. Turn
the printer off and then back on again. If the error does not
clear, contact Epson. |
| The black and yellow ink out lights are
flashing |
The firmware update has failed, and the printer
is in recovery mode. Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for instructions on
repeating the firmware update. |
| The paper and
ink out lights are
flashing alternately |
The ink pads are near or at the end of their
service life. Contact Epson for support. (To continue printing,
press the paper button.) |
