Setting Up Network Scanning

You can set up network scanning through the optional Epson Network Interface Unit (Windows). First connect the unit to your scanner and verify that both are working properly. Then follow the instructions here to set up computers for network scanning using the Epson Scan 2 Utility.

Note: Make a note of the IP address or host name of the Epson Network Interface Unit so you can enter it in these steps.

Connect the Epson Network Interface Unit to your scanner and verify they are working properly.
Do one of the following to start the Epson Scan 2 Utility:
- Windows 10: Click and select EPSON > Epson Scan 2 Utility.
- Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
- Windows (other versions): Click or Start, and select All Programs or Programs. Select EPSON > Epson Scan 2 > Epson Scan 2 Utility.
Select Settings from the Scanner drop-down list. You see a screen like this:

Note: If you see an Enable Editing button, click it so that you can modify the scanner settings.
Select your scanner and click Add. You see a screen like this:
Do one of the following:
- Under Search for Network, select the IP address of your Epson Network Interface Unit and click Add.
- Select the Enter address setting, type in the IP address or host name of your Epson Network Interface Unit, and click Add.
Click OK to save your settings and then close Epson Scan 2 Utility.

Setting Up Network Scanning - Windows