You can
print documents on a variety of paper types and sizes.
Flip the
feeder guard forward.
Raise
the paper support and its extension, pull out the output tray, then
raise the paper stopper.
Slide
the edge guide to the left.
Insert
paper, glossy or printable side up and short edge first, against
the right side. If you are inserting a stack of paper, fan the
sheets first and tap the stack on a flat surface to even the
edges.
Slide
the edge guide against the paper, but not too tightly.
Flip the
feeder guard back.
Always follow
these paper loading guidelines:
Load only the
recommended number of sheets.
Load paper short
edge first, no matter which way your document faces.
Load letterhead
or pre-printed paper top edge first.
Do not load paper
above the arrow mark inside the edge guide.
Check the paper
package for any additional loading instructions.
If you use paper
with binder holes, load only one sheet at a time and use only these
sizes: Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches [210 × 297 mm]),
or Legal (8.5 × 14 inches
[216 × 357 mm]).