Selecting Wireless Network Settings from
the Control Panel
select or change wireless network settings using your product
To install your product on a wireless network, follow the
instructions on the Start Here sheet and install the
necessary software from the product CD. The installer program
guides you through network setup.
home button, if necessary.
the left arrow button to select Wi-Fi
Setup and then press OK. You see this screen:
the OK button to select
Wi-Fi Setup Wizard.
the up or down arrow buttons to select the name of your wireless
network and press the OK button. If you do not see your
wireless network's name, you can enter it manually.
Note: To enter the
wireless network name manually, select Other Networks and press the OK button. Enter your network name as
described in the next step.
your wireless password (or network name and then password).
arrow buttons to highlight a character or a function button
displayed on the keypad. Then press the OK button to select it.
To change the
case of letters or select symbols, select AB12 (uppercase), ab12 (lowercase), or Symbol and press the OK button. Then highlight a number or
symbol and press the OK
button to select it.
To enter a
space, select Space and press the
characters, select the back arrow and press the OK button.
finish entering characters, select Done and press the OK button.
the OK button to
confirm wi-fi settings.
Yes if you want to print a network
status report, or No if not, and
press the OK
button. The WiFi light should now be on, but
Note: If the
WiFi light is off, you may have selected the wrong
network name or entered the password incorrectly. Repeat these
steps to try again.