Loading Paper in Cassette 2 (Lower Cassette)

You can load paper up to this size in the lower paper cassette: Legal (8.5 × 14 inches [216 × 357 mm]).
Note: Do not remove or insert the paper cassette during printing.
  1. Close the output tray, if necessary.


    Note: As you slide in the output tray, there may be slight resistance and noise. This is normal.
  2. Open the front cover.


  3. Pull on the front cover to pull out the lower paper cassette.


  4. Slide the edge guides outward.


    Note: If you are using legal-size paper, remove the CD/DVD tray from the product. Press the button on the cassette and then extend it as shown.


  5. Set the front edge guide to the paper size you are using.


    Note: Various paper sizes are marked on the tray.
  6. Insert paper with the glossy or printable side facedown.


    Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette.
  7. Slide the side edge guides against the paper, but not too tightly.


    Note: Make sure the paper is under the tabs on the edge guides.
  8. Keep the cassette flat as you insert it.


Always follow these paper loading guidelines:
Related references
Paper Loading Capacity