If the projected image seems to contain electronic
interference (noise) or static, try the following solutions:
-
Check the
cables connecting your computer or video source to the projector.
They should be:
-
Separated
from the power cord to prevent interference
-
Securely
connected at both ends
-
Not
connected to an extension cable
-
No longer
than 10 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for
HDMI cables
-
Check the
settings on the projector's Signal menu to make sure they match the
video source. If available for your video source, adjust the
Progressive and Noise Reduction settings.
-
Select a
computer video resolution and refresh rate that are compatible with
the projector.
-
If you are
projecting from a computer, press the Auto button on the remote control to
automatically adjust the Tracking
and Sync settings.
-
If you
adjusted the image shape using the projector controls, try
decreasing the Sharpness setting to
improve image quality.
-
If you
connected an extension power cable, try projecting without it to
see if it caused interference in the signal.
-
If you are
using the USB Display function, turn off the Transfer layered window setting in the Epson USB
Display Settings program on your computer.