Online Reference Guide

Index
Search
Glossary
Contents
Help

Using the Optional Automatic Document Feeder

Loading Documents into Your Automatic Document Feeder

Loading documents manually

Your Automatic Document Feeder can automatically load up to 30 sheets of the following paper sizes (based on a paper weight of 17 lbs and a stack thickness of 6.0 mm or less):

Checks

85 x 127 mm (3.3 x 5 inches)

B5

182 x 257 mm (7.17 x 10.1 inches)

A4

210 x 297 mm (8.27 x 11.69 inches)

Letter

215.9 x 279.4 mm (8.5 x 11 inches)

Legal

215.9 x 355.6 mm (8.5 x 14 inches)

Follow the steps below to load documents into the Automatic Document Feeder.

Note:
  • Make sure no dust is on the document table when using the Automatic Document Feeder. Dust on the document table near the carriage home position may result in vertical lines on the scanned images.
  • Opening the Automatic Document Feeder or its cover while it is operating results in an option error, and document feeding stops.

Pull out the paper support.

Slide the right edge guide all the way to the right.

Insert the document stack into the Automatic Document Feeder until it meets resistance. Make sure that the side you want to scan is facing up. Then move the right edge guide so it is flush with the right edge of your document.

Documents are output into the lower tray after scanning is finished.

Note:
  • Before starting scanning, be sure to select ADF in the Document Source settings.
  • In the following situations, see the respective sections for problem-solving information:

Loading documents manually

Follow the steps below to load documents manually when the Automatic Document Feeder is installed.

Lift the Automatic Document Feeder.

Place the document on the document table and then place the ADF Document Mat on the top.

Lower the Automatic Document Feeder and scan the document.

Note:
  • Always close the Automatic Document Feeder and its cover before scanning. If you are scanning thick material or documents of more than 2 cm in height, you can leave the Automatic Document Feeder at the upright position.
  • Be sure to select Document Table in the Document Source settings.


[Top]


Previous

Next
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION