Paper out or paper jam |
Follow the instructions on the screen to load
paper in the indicated paper source or check for paper jams. |
Paper jam |
Follow the instructions on the screen to see
how to remove the jammed paper from the area indicated. Then press
either of the Start buttons. |
No paper source matches paper size
setting. |
Load the paper you want to print on, or select
the size loaded in the product. |
Communication error |
Make sure the computer is connected to your
product and your software is installed correctly. |
Recovery mode |
An error has occurred during firmware updating.
Connect your product using a USB cable and try updating the
firmware again. If you still receive this error message, contact
Epson for support. |
Cannot recognize USB device |
Make sure the USB thumb drive or other device
has been inserted correctly. |
No dial tone detected. Try Check Fax
Connection. |
Make sure the phone cable is connected
correctly and the phone line works. If you connected the product to
a PBX (Private Branch Exchange) phone line or Terminal Adapter,
turn off the Dial Tone Detection
setting. |
Printer error |
Turn the product off and then back on again. If
the error continues, make sure you removed the foam and plastic
protective materials from inside the product. |