| Setting | Options | Description |
|---|---|---|
| Nozzle Check | — | Select to run the nozzle check utility and inspect the printed pattern to determine if you need to clean the print head |
| Head Cleaning | Selected Nozzles
or All Nozzles
Execute (Light) Execute (Medium) Execute (Heavy) |
Select to run the head cleaning utility on
either selected nozzles indicated on the nozzle check print pattern
(Selected Nozzles) or on all nozzles
(All Nozzles)
Execute (Light): run this level of cleaning first Execute (Medium): run this level of cleaning if the light level of cleaning left faint or missing ink in your printouts Execute (Heavy): run this level of cleaning if the light and medium levels of cleaning still left faint or missing ink in your printouts The first several cleanings are performed in the same way as for initial ink charging, regardless of the selected cleaning level. The automatic cleaning start time displayed on the control panel screen may be reset, depending on the selected cleaning level. |
| Preventive Cleaning | — | Select to delay the automatic cleaning cycle and reset the automatic cleaning start time displayed on the LCD screen (automatic cleaning is performed by the printer for a set time period to keep the print head in good condition) |
| Tube Washing (Standard) | White Ink (White
Edition)
Color Ink |
Select to run the tube washing utility to remove accumulated sediment in the selected ink tube. For White Ink, a message is displayed when it is time to perform maintenance. For Color ink, wash the tubes if performing head cleaning several times does not clear the problem. Execute after preparing the selected ink cartridge and cleaning cartridge. |
| Tube Washing (Eco) | White Ink
Color Ink |
Select to use a tube cleaning kit to wash the tube daily. A message is displayed when it is time to perform maintenance. |
| Head Cleaning Set | Yes
No |
Select to move the platen and print head to the maintenance position before replacing the head cleaning set |
| Head Cap Cleaning | Yes
No |
Select to move the platen and print head to the maintenance position before cleaning the caps |
| Cleaning Around Head | Yes
No |
Select to move the platen and print head to the maintenance position before cleaning around the head |
| Waste Ink Counter | — | Select to reset the waste ink counter after replacing the waste ink bottle |
| Replace White Ink | Yes
No |
Select to switch the printer from white ink mode to color mode or vice-versa (White Edition) |
| Storage Mode | Yes
No |
Select if you have stored the printer for a long time (one month or more) so you can replace the cleaning fluid |