This projector is a Class 2 laser product that complies with the
IEC60825-1 international standard for lasers. Follow these safety
instructions when using the projector.
- If an error occurs in the projector, turn off the power and
unplug the projector immediately. Continuing to use the projector
could result in an electric shock, fire, or visual impairment.
Contact Epson support.
- Do not attempt to dissassemble or modify the projector. The
projector contains a high-power laser component. Serious injury
could result.
- Do not look into the lens during projection. Also, do not look
into the lens using optical devices, such as a magnifying glass or
telescope. This could cause visual impairment.
- When turning on the projector at a distance using the remote
control, make sure no one is looking into the lens.
- Do not allow small children to operate the projector. Children
must be accompanied by an adult.
- Do not apply optical devices, such as a magnifying glass or
reflector, to the projected image. Using the projector may result
in physical harm, fire, or an accident.
- Before using the projector, make sure there is nothing in the
area that could reflect the projected image.
- When disposing of the projector, do not disassemble it. Dispose
of the projector in accordance with your local or national laws and
regulations.
There is a label attached to the projector to
indicate it is a Class 2 product. The label contains the following
information:
- Invisible laser radiation
- Do not stare into beam or view directly with optical
instruments
- Class 2 laser product
- Pulse width