You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Note: The lamp
usage timer does not register any hours until you have used the
lamp for at least 10 hours. Available settings depend on the
current input source.
| Setting | Options | Description |
|---|---|---|
| Projector Info | — | See the next table in this topic |
| Lamp Info | Lamp Hours
Lamp Status |
Displays the following lamp information:
Lamp Hours: displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Lamp Status: displays icons indicating the operating status of each lamp |
| Version | Main
Video Status Monitor |
Displays the projector's firmware information |
Projector Info settings
| Setting | Options | Description |
|---|---|---|
| Source | — | Displays the name of the current input source port |
| Input Signal | — | Displays the input signal setting of the current input source |
| Resolution | — | Displays the resolution of the current input source |
| Video Signal | — | Displays the video signal format of the current input source |
| Refresh Rate | — | Displays the refresh rate of the current input source |
| Sync Info | — | Displays information that may be needed by a service technician |
| Status | — | Displays information about projector problems that may be needed by a service technician |
| Serial Number | — | Displays the projector's serial number |
| Event ID | — | Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes |
| HDBaseT Signal Quality | — | Displays the image signal information from the HDBaseT port |