Manually Connecting to a Wi-Fi Router Using EpsonNet Config

You can use EpsonNet Config to connect the scanner to an existing Wi-Fi network on a router or access point.
Note: You must have a computer with a wireless adapter to set up the connection.
  1. Turn on the scanner.
  2. Connect the computer to the scanner using a direct Wi-Fi connection.
  3. Do one of the following to start EpsonNet Config:
    • Windows 10: Click > All apps > EpsonNet > EpsonNet Config.
    • Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.
    • Windows (other versions): Click or Start, and select All Programs or Programs. Select EpsonNet > EpsonNet Config > EpsonNet Config.
    • OS X: Open the Applications folder, select Epson Software > EpsonNet > EpsonNet Config > EpsonNet Config.
  4. Select your scanner from the list and click Configuration.
  5. Select Network Interface > Network > Basic (Wireless).
  6. Select the following settings for your infrastructure connection:
    • Communication mode: Select Infrastructure.
    • SSID: Enter the SSID of the wireless router or access point.
    • Security level: Select the wireless connection's security level.
    • WEP Settings or WPA Settings: Enter the wireless connection's security key.
  7. Click Transmit.
  8. Open the Device menu and select Quit.
  9. Turn off the scanner.
  10. Disconnect the computer or device's direct Wi-Fi connection, then connect the computer or device to the router or access point.
  11. Turn on the scanner. When the  Wi-Fi light on the scanner stays on, the connection is established.
  12. Set up network scanning on your computer.
Parent topic: Connecting to an Existing Wi-Fi Network
Related tasks
Enabling a Direct Wi-Fi (AP Mode) Connection
Setting Up Network Scanning