Matching the Screens Automatically

You can automatically correct the brightness and tint for multiple projectors based on the brightness and tint settings you selected for the master projector.
Before you start, make sure of the following:
  • Select Multi-Projection for the Color Mode setting and adjust the Brightness, Contrast, Color Saturation, Tint, White Balance, and Advanced settings in the Image menu, as necessary, on the master projector.
  • You are projecting on a matte white diffusion screen that is flat and even.
  • The projected image is between 100 to 300 inches (254 to 762 cm) and is rectangular after tiling.
  • All the projectors are connected to a network and the Location Setup setting has been configured.
  • Nothing is blocking the built-in camera on the front of each projector.
  • The projected images do not overlap or have gaps between them.
  • The projectors are installed parallel to the screen.
  • The Blend Range setting is set between 15 to 45%.
Note: Auto adjustment is not available for the following lenses: ELPLR04, ELPLL08, or ELPLL07. After auto adjustment, the movement range for lens shift is reduced.
  1. Press the Menu button.
  2. Select the Extended menu and press Enter.
  3. Select the Multi-Projection setting and press Enter.
  4. Select the Screen Matching setting and press Enter.
  5. Select Start Auto Adjustment press Enter.


    When adjustment starts, you see an adjustment pattern. Adjustment is complete when you see a displayed image.

After automatic adjustment, the Color Uniformity and Color Matching settings are returned to their default values.

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use