Turning On the Projector

Turn on the computer or video equipment you want to use before you turn on the projector so it can display the image source.
Caution:
Install the current breaker for 13 A to 20 A to the wiring in the building that supplies electricity to the projector.
  1. Connect the power cord to the projector's power inlet.


  2. Plug the power cord into an electrical outlet.
  3. Turn on the power switch on the back of the projector.


    The projector's On/Standby light turns blue. This indicates that the projector is receiving power.
    Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. If you selected Computer or BNC for the Auto Power On setting in the Extended menu, the projector turns on when it detects an input signal from those ports.
  4. Press the On button on the projector or remote control to turn on the projector.
    The projector beeps and the Status light flashes blue as the projector warms up. After about 30 seconds, the Status light stops flashing and turns blue.
    Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is especially dangerous for children and pets.
    Caution:
    Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction.
If you do not see a projected image right away, try the following:
  • Make sure the lens cap is off.
  • Turn on the connected computer or video device.
  • Insert a DVD or other video media and press the play button, if necessary.
  • Press the Search button on the remote control to detect the video source, or press one of the source buttons on the remote control or projector.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use