Solutions When the Image Brightness
or Colors are Incorrect
If the projected image is too dark or light, or the
colors are incorrect, try the following solutions:
Press the
Color Mode button on the remote
control to try different color modes for the image and
environment.
Check your
video source settings.
Adjust the available settings on the Image menu for
the current input source, such as Brightness, Contrast, Tint, Color
Temp., and/or Color
Saturation.
Make sure
you selected the correct Input
Signal or Video Signal
setting on the Signal menu, if available for your image
source.
Make sure you selected the correct Gamma or RGBCMY setting in the Image menu.
Make sure
all the cables are securely connected to the projector and your
video device. If you connected long cables, try connecting shorter
cables.
If you are
using the ECO Power Consumption setting, try
selecting Normal in the projector's menus.
Note: At high
altitudes or locations subject to high temperatures, the image may
become darker and you may not be able to adjust the Power
Consumption setting.
Position
the projector close enough to the screen.
If the
image has been progressively darkening, you may need to replace the
projector lamp soon.