Setting Up Crestron Connected

To set up your projector for monitoring and control using a Crestron Connected system, make sure your computer and projector are connected to the network.
Note: If you want to use the Crestron Connected system when the projector is turned off, you need to adjust the Standby Mode settings in the Extended menu.
  1. Press the Menu button.
  2. Select the Network menu and press Enter.
  3. Select the Others menu and press Enter.


  4. Set the Crestron Connected setting to On to allow the projector to be detected.
    Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson Projector Management software.
  5. Turn off the projector, then turn it on again to enable the setting.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use