For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Your computer's monitor port or video card refresh rate (vertical frequency) must be compatible with the projector. (See your computer or video card manual for details.)
The table here lists the compatible refresh rate and resolution for each compatible video display format.
Display format | Refresh rate (in Hz) | Resolution (in pixels) |
---|---|---|
Computer signals (analog RGB) | ||
VGA | 60/72/75/85 | 640 × 480 |
SVGA | 60/72/75/85 | 800 × 600 |
XGA | 60/70/75/85 | 1024 × 768 |
WXGA | 60 | 1280 × 768 |
60/75/85 | 1280 × 800 | |
60 | 1366 × 768 | |
WXGA+ | 60/75/85 | 1440 × 900 |
WXGA++ | 60 | 1600 × 900 |
SXGA | 70/75/85 | 1152 × 864 |
60/75/85 | 1280 × 960 | |
60/75/85 | 1280 × 1024 | |
SXGA+ | 60/75 | 1400 × 1050 |
WSXGA+1 | 60 | 1680 × 1050 |
UXGA | 60 | 1600 × 1200 |
1920 × 1080 | 50/60 | 1920 × 1080 |
WUXGA2 | 60 | 1920 × 1200 |
SDTV (480p) | 59.94 | 720 × 480 |
SDTV (576p) | 50 | 720 × 576 |
HDTV (720p) | 50/59.94/60 | 1280 × 720 |
HDTV (1080p) | 50/59.94/60 | 1920 × 1080 |
Component video | ||
SDTV (480i/480p) | 59.94 | 720 × 480 |
SDTV (576i/576p) | 50 | 720 × 576 |
HDTV (720p) | 50/59.94/60 | 1280 × 720 |
HDTV (1080i) | 50/59.94/60 | 1920 × 1080 |
DVI-D, HDMI, HDBaseT, and DisplayPort In input signals | ||
VGA | 60 | 640 × 480 |
SVGA | 60 | 800 × 600 |
XGA | 60 | 1024 × 768 |
WXGA | 60 | 1280 × 800 |
60 | 1366 × 768 | |
WXGA+ | 60 | 1440 × 900 |
WXGA++ | 60 | 1600 × 900 |
WSXGA+ | 60 | 1680 × 1050 |
SXGA | 60 | 1280 × 960 |
60 | 1280 × 1024 | |
SXGA+ | 60 | 1400 × 1050 |
UXGA | 60 | 1600 × 1200 |
1920 × 1080 | 50/60 | 1920 × 1080 |
WUXGA2 | 60 | 1920 × 1200 |
QXGA3 | 60 | 2048 × 1536 |
WQHD3 | 60 | 2560 × 1440 |
WQXGA2, 3 | 60 | 2560 × 1600 |
SDTV (480i/480p) | 59.94 | 720 × 480 |
SDTV (576i/576p) | 50 | 720 × 576 |
HDTV (720p) | 50/59.94/60 | 1280 × 720 |
HDTV (1080i) | 50/59.94/60 | 1920 × 1080 |
HDTV (1080p)3 | 23.98/24/29.97/30/50/59.94/60 | 1920 × 1080 |
4K×2K2, 3 | 23.98/24/25/29.97/30 | 3840 × 2160 |
4K×2K3 | 50/59.94/60 | 3840 × 2160 |
4K×2K (SMPTE)2, 3 | 23.98/24 | 4096 × 2160 |
4K×2K (SMPTE) | 25/29.97/30 | 4096 × 2160 |
4K×2K (SMPTE)3 | 50/59.94/60 | 4096 × 2160 |
4K (3840 × 2160) Dual | 100.0/120.0 | 3840 × 2160 |
4K (3840 × 2160) Dual Columns | 100.0/120.0 | 3840 × 2160 |
1 Compatible only when Wide is selected as the Resolution setting
2 Compatible only with VESA CVT-RB (Reduced Blanking) input signal
3 HDMI or HDBaseT input only
Display format | Refresh rate (in Hz) | Resolution (in pixels) | Number of bits | Level |
---|---|---|---|---|
SD-SDI (NTSC Interlace) | 59.94 | 720 × 480 1 | 10 | — |
SD-SDI (PAL Interlace) | 50 | 720 × 5761 | ||
HD-SDI (Progressive) | 50/59.94/60 | 1280 × 7201 | ||
HD-SDI (Interlace) | 50/59.94/60 | 1920 × 10801 | ||
HD-SDI (Progressive) | 23.98/24/25/29.97/30 | 1920 × 10801 | ||
3G-SDI SMPTE: ST425-1 (Interlace)2 | 50/59.94/60 | 1920 × 10803 | 10/12 | A/B-DL |
3G-SDI SMPTE: ST425-1 (Progressive)2 | 23.98/24/25/29.97/30 | |||
3G-SDI SMPTE: ST425-1 (Progressive)2 | 50/59.94/60 | 1920 × 10801 | 10 | |
3G-SDI SMPTE: ST425-1 (Interlace)2 | 50/59.94/60 | B-DS | ||
3G-SDI SMPTE: ST425-1 (Progressive)2,3 | 23.98/24/25/29.97/30/50/59.94/60 | |||
3G-SDI SMPTE: ST425-5 (Progressive)2, 4 | 23.98/24/25/29.97/30 | 3840 × 21607 | 10/125 | A |
50/59.94/60 | 3840 × 21601 | 10 | ||
23.98/24/25/29.97/30 | 4096 × 21607 | 10/125 | ||
50/59.94/60 | 4096 × 21601 | 10 | ||
12G-SDI SMPTE: ST2082-10 (Progressive)2, 6 | 23.98/24/25/29.97/30 | 3840 × 21607 | 10/125 | Type 1 |
50/59.94/60 | 3840 × 21601 | 10 | ||
23.98/24/25/29.97/30 | 4096 × 21607 | 10/125 | ||
50/59.94/60 | 4096 × 21601 | 10 |
1 Compatible with YCbCr 4:2:2 color difference signals
2 Supports HDR (HDR10 and HLG)
3 Compatible with RGB YCbCr 4:4:4 input signals
4 Supports only quad-link input
5 YCbCr 4:2:2 supports only 12 bits
6 Supported only by the SDI1 In port
7 Compatible with RGB YCbCr 4:2:2/4:4:4 input signals