Transferring Settings using a Computer

After saving projector settings to a computer, you can transfer them to another projector of the same model.

Your computer must be running one of the following operating systems:

Windows Vista
Windows 7
Windows 8.x
Windows 10
OS X 10.7.x
OS X 10.8.x
OS X 10.9.x
OS X 10.10.x
OS X 10.11.x
macOS 10.12.x
macOS 10.13.x
macOS 10.14.x

Note: Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have to repeat your adjustments.

Turn off the projector and unplug the power cord from the projector's power inlet.
Connect a USB cable to your projector's USB-B port.
Connect the other end to any available USB port on your computer.
Press and hold the Esc button on the remote control as you connect the power cord to the projector's power inlet.
When all of the projector lights turn on, release the Esc button. The projector shows up as a removable disk on your computer.
Note: The removable disk contains a single file called PJCONFDATA.bin. If you need to change the file name, add text after PJCONFDATA using only alphanumeric characters. If you change the PJCONFDATA part of the file name, the projector may not be able to recognize the file correctly.
Open the removable disk and copy the PJCONFDATA.bin file to your computer.
Once the file has been copied, eject the removable disk (Windows) or drag the disk icon the Trash (Mac).
Disconnect the USB cable from the projector.
Turn off the other projector you want to transfer the settings to and unplug the power cord.
Connect the USB cable from your computer to the projector's USB-B port.
Press and hold the Menu button on the remote control as you connect the power cord to the projector's power inlet.
When all of the projector lights turn on, release the Menu button. The projector shows up as a removable disk on your computer.
Copy the PJCONFDATA.bin file from your computer to the top level folder of the removable disk.
Note: Do not copy any files or folders other than the PJCONFDATA.bin file to the removable disk.
Once the file has been copied, eject the removable disk (Windows) or drag the disk icon the Trash (Mac).
Disconnect the USB cable from the projector. All of the status lights flash to indicate that settings are transferring to the projector. When the lights stop flashing, the projector enters standby mode.
Caution:

Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector.