If only a partial computer image appears, try the
following solutions:
- For VGA connections, press the Auto button on the remote control to optimize
the image signal.
- Make sure
the Scale setting in the Extended
menu is turned off.
- Try adjusting the image position using the
Position setting in the Signal
menu.
- Press the
Aspect button on the remote
control to select a different image aspect ratio.
- Check your
computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual
for details.)
- Check the
resolution assigned to your presentation files to see if they are
created for a different resolution than you are projecting in. (See
your software help for details.)
- Make sure you selected the correct Projection setting in the Extended menu.
- Try adjusting the image position using the
Image Shift setting in the
Settings menu.
- If you are projecting in Content Playback mode, make sure you are
using the correct Overlay Effect
setting in the Settings menu.