You
can adjust the brightness of your projector's light source.
Turn on the projector and switch to the image
source you want to use.
Press the Menu button.
Select the Operation menu and press Enter.
Select Light Source
Brightness Control and press Enter.
If you want to maintain
the brightness at a specific level, select the Maintain Brightness setting and select
On.
If you turn on
Maintain Brightness, select the
Maintain Brightness Level setting
and check the Estimated Remains
information.
If you turn off
Maintain Brightness, select the
Light Source Mode setting:
Normal:
Sets brightness to the maximum level (ideal for conference rooms,
auditoriums, and lecture halls)
Quiet: Sets
brightness to 70% and reduces fan noise (ideal for libraries,
theaters, museums, and art galleries)
Extended:
Sets brightness to 70% and extends the life expectancy of the light
source (ideal for darker environments with ambient light, such as
museums and art galleries, where a reduced maintenance cycle is
desired)
Custom:
Allows you to select a custom brightness level between 70 to
100%
If you set the
Light Source Mode setting to
Custom, select Brightness Level and use the left and right
arrow buttons to select the brightness.
Press Menu
or Esc to exit the menus.
Note: For the
best results in maintaining the brightness level, set the
Light Source Calibration setting
to Run Periodically in the
projector's Management menu.