If you have
installed corner markers on the projection surface, you can use the
projector's Auto Screen
Adjustment setting to correct the image shape automatically.
Note: The
projected image needs to be 110 inches
(279.4 cm) or less diagonally to use the
Auto Screen Adjustment. Make sure the projector is squarely facing
the projection surface. Auto Screen Adjustment may not work if your
image surface:
- Is not flat.
- Is patterned.
- Is dirty.
- Has obstructions or objects on the image surface.
Note: The
projector includes 4 magnets and 4 stickers for Auto Screen
Adjustment. If your projection surface is magnetic, attach the
stickers to the magnets. If you projection surface isn't magnetic,
attach the stickers directly to the projection surface. If you
attach the stickers directly to the surface, they can only be used
once.
Note: Before
performing Auto Screen Adjustment, set the screen type setting. The
adjustments reset when you change the Screen Type. You may not be able to correct
the image shape correctly when you shift the image.
- Press the Menu button.
- Select the Installation
menu and press
Enter.
- Select the Auto Screen
Adjustment setting and press Enter. You see a guide
screen.
- Follow the on-screen instructions to adjust the position of the projected image so that the corner markers appear just inside the yellow area.
- Press Enter. A guide pattern appears
and the projector starts adjusting the image shape.
Note: If necessary, you can fine-tune your image adjustments using the Quick Corner setting.
