Connecting a USB Device to the Control Pad

You can connect your USB device to the USB-A port on the control pad (BrightLink 1485Fi) and use it to project images and other content.
  1. If your USB device came with a power adapter, plug the device into an electrical outlet.
  2. Connect a USB cable to either USB-A port on the projector and to the upper USB-B port on the control pad.
  3. Enable Connect ELPHD02 in the HDBaseT settings of the projector's Signal I/O menu.
  4. Connect the USB cable for the device (or a USB flash drive ) to the USB-A port on the bottom of the control pad.


  5. Connect the other end of the cable (if applicable) to your device.
Note: You can also connect a USB device directly to one of the projector's USB-A ports.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use