Connecting to a Computer for Pen and Finger Use

If you connected your computer to a Computer or HDMI port on the projector, you also need to connect the USB cable so you can use the pens and your fingers with your computer.
Note: A Touch Unit is optional for the BrightLink 1480Fi and must be installed for finger touch operation.
Note: If your computer is connected to an HDMI input on the control pad (BrightLink 1485Fi), connect the computer's USB cable to the control pad's USB-B port.
  1. Connect the USB cable to your projector's USB-B1 port.


    Note: If your computer is connected to the projector's HDMI3 port, connect the USB cable to the projector's USB-B2 port. You can change the HDMI port associated with the USB-B2 port by changing the USB-B2 setting in the projector's Pen/Touch > PC Interactivity menu.
  2. Connect the other end to any available USB port on your computer.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use