Power Cleaning Using the Product Control Panel

If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning.
Running a Power Cleaning consumes a lot of ink, so you should run it only if necessary. Make sure each ink pack is at least one-third full before running a Power Cleaning, or it may damage the product. This feature uses a lot of ink and causes the maintenance box to reach its capacity faster than normal.
  1. Press the  power button to turn off the product.
  2. Hold down the 2 and 8 buttons on the keypad, and press and hold the  power button at the same time until the Power Cleaning screen appears.
  3. Follow the on-screen instructions to run the Power Cleaning.
  4. When Power Cleaning is finished, run a nozzle check.
If you don’t see any improvement after running a Power Cleaning, wait at least 6 hours without printing. Then try cleaning the print head again. If quality still does not improve, contact Epson support.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use