Turn
on the computer or video equipment you want to use before you turn
on the projector so it can display the image source.
Note: Install
a circuit breaker for 13 A to 20 A to the wiring that supplies
power to the projector and do not connect any other devices to that
wiring.
If you do not see a projected image right away, try
the following:
- Make sure
the lens cap is off.
- Turn on
the connected computer or video device.
- Insert a
DVD or other video media and press the play button, if
necessary.
- Press the Search
button on the remote control to detect the video source, or press
one of the source buttons on the remote control or projector.