Auto Source Search
|
On
Off
|
Enables the projector to automatically select an input
source (setting not displayed in Content Playback mode) |
Light Source Brightness
Control
|
Maintain Brightness
Maintain Brightness
Level
Estimated Remains
Light Source Mode
Brightness Level
|
Controls the constant brightness of the projector's
light source
Maintain Brightness:
maintains a constant brightness
Maintain Brightness
Level: selects the brightness level to maintain when the
Maintain Brightness setting is
enabled
Estimated Remains:
if the Maintain Brightness
setting is enabled, displays the remaining number of hours the
projector can maintain constant brightness
Light Source Mode:
selects the brightness mode of the projector when the Maintain Brightness setting is
disabled
- Normal: maximum
brightness
- Quiet: 70%
brightness with reduced fan noise
- Extended: 70%
brightness and extends the life expectancy of the light source
- Custom: select a
custom brightness level and enable use of the next setting
Brightness Level:
select the Custom brightness
level you want |
Direct Power On
|
On
Off
|
Controls whether the projector automatically turns on
when you plug it in |
Auto Power On
|
HDMI1
Computer1
Off
|
Selects whether to automatically turn on the projector
when you connect an input signal to a specific input source
If you select HDMI1,
set the method for automatically turning on the projector in the
Power On Trigger setting. |
Power On Trigger
|
Plug-in Detection
Signal Detection
|
Sets the way the projector turns on when Auto Power On
is set to HDMI1.
Plug-in Detection:
automatically turns the projector on when it detects a connected
device is turned on
Signal Detection:
automatically turns the projector on when an HDMI signal is
detected
Note: When
Signal Detection is selected, the
power used in standby mode increases. |
Sleep Mode
|
On
Off
|
Automatically turns off the projector after an interval
of inactivity |
Sleep Mode Timer
|
1 to 30 minutes |
Sets the time before the projector automatically turns
off (Sleep Mode must be turned
on) |
A/V Mute Timer
|
On
Off
|
Automatically turns off the projector after 30 minutes
of inactivity |
Standby Mode
|
Communication On
Communication Off
|
Enable this setting to allow monitoring and control of
the projector over a network when the projector is in standby mode
(setting is displayed only when A/V
Output is set to While
Projecting) |
Port
|
Wired LAN
Wireless LAN
|
Selects the port to use while the Standby Mode setting is set to Communication On |
Startup Source
|
Varying options |
Select the input source you want to project when the
projector is turned on in Content Playback mode |
Quick Startup
|
20min.
60min.
90min.
Off
|
Sets the time period for which you want to be able to
restart the projector within five seconds of turning it off (Quick
Start mode).
Make sure to first set A/V Output to While Projecting, Auto Power On to
Off, and Power On Trigger to
Plug-in Detection. It may take
longer than five seconds when projecting from the projector's
USB or HDMI Out ports or when using the Screen
Mirroring features. |
Closed Caption
|
CC1
CC2
Off
|
Enables and selects the type of closed captions to
display |
Indicators
|
On
Off
|
Enables or disables the status indicator lights on the
projector |
Inv Direction Button
|
On
Off
|
Enable this setting if you want to invert the direction
of the arrow buttons on the control panel to match the projector's
installation position |
Content Playback
|
On
Off
|
Enables Content Playback mode, allowing you to project
custom playlists and add color and shape effects to projected
images |
Overlay Effect
|
Overlay Effect
Shape Filter
Color Filter
Lightness
|
Adds color and shape effects to the projected image
(setting not displayed when using Edge
Blending feature) |
USB Viewer
|
— |
Selects and plays back a playlist saved on the USB
flash drive |
Reset Operation
Settings
|
— |
Reset all settings on the Operation menu to their
default values |