If
you want to quickly restart the projector within five seconds after
turning it off, you can change the Quick
Startup setting. You can select 20, 60, or
90 minutes of Quick Startup time.
Note: The
projector may take longer than five seconds to start up in the
following conditions:
- When projecting from the projector's USB-B or HDMI Out port
- When projecting with Screen Mirroring
Note: The
Quick Startup setting is displayed only if the A/V Output setting
in the Signal I/O menu is set to While
Projecting, the Auto Power On setting in the Network menu is
set to Off, and the Power On
Trigger setting in the Operation menu is set to Plug-in Detection.
- Turn on the projector.
- Press the Menu button.
-
Select the Operation menu and press
Enter.
-
Select the Quick
Startup setting and press Enter.
-
Select how long you want to enable Quick
Startup mode for and press Enter.
- Press Menu or Esc to exit the menus. Press the power button to quickly restart the projector in this mode.
