If only a partial computer image appears, try the
following solutions:
- For VGA connections, press the Auto button on the remote control to optimize
the image signal.
- Make sure the Resolution setting in the Signal menu is set
correctly for the input signal.
- Try adjusting the image position using the
Position setting in the Signal
menu.
- Press the
Aspect button on the remote
control to select a different image aspect ratio.
- If you zoomed into or out of the image using the
E-Zoom buttons, press the
Default button until the
projector returns to a full display.
- Check the
cables connecting the computer or video source to the projector.
Try connecting different cables.
- Check your
computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual
for details.)
- Check the
resolution assigned to your presentation files to see if they are
created for a different resolution than you are projecting in. (See
your software help for details.)
- Make sure you selected the correct Projection setting in the Extended menu.
- If the other solutions do not solve the problem,
reset all of the projector settings using the options on the
Reset menu.