Selecting Screen Mirroring Settings

You can select Screen Mirroring settings for your projector and then project images from your mobile device.
  1. Press the  Settings button on the remote control.
  2. Press the arrow buttons to select the Settings menu and press Enter.

  3. Select the Operation > Screen Mirroring setting and press Enter.
  4. Set the Screen Mirroring setting to On.
  5. Select Screen Mirroring Settings and press Enter.
  6. To enter a name for the projector, select Display Name. You can enter up to 32 alphanumeric characters.
  7. Select Basic or Extended as the Operation Mode setting.
  8. Select Adjust Image Quality to adjust the screen mirroring speed/quality. Select a small number to improve the quality and select a large number to increase the speed.
  9. Select Extended and select these settings as necessary (the Extended setting is only available if you select Extended as the Operation Mode setting):
    • Interrupt Connection lets you select whether to allow other devices to connect while using Screen Mirroring. Select Off to prevent other devices from connecting while Screen Mirroring is active, or select On to allow another device to connect.
    • Channel lets you select the wireless channel for the Screen Mirroring connection.
  10. Press the  Settings button to exit the menu or the  Esc button to return to the previous screen.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use