Projector Feature Settings - Settings Menu

Options on the Settings menu let you customize various projector features.

Setting Options Description
Sound Volume Adjusts the volume of the projector's speaker
Sound Mode Sets a sound mode for the type of playback content (music, movie, etc.)

Standard: best for normal sound quality

Vocal: best for voices and dialogue

Music: best for music

Movie: best for video or movie audio

Installation Keystone Adjusts image shape to rectangular (horizontally and vertically)

H/V Keystone: lets you manually correct horizontal and vertical sides

Quick Corner: select to correct image shape and alignment using an on-screen display

Zoom Adjusts the image size
Projection Selects the way the projector faces the screen
OSD Rotation Rotates the menu display 90°
Display Welcome Guide Shows the product features and usage tips
Messages Select On to display messages for color mode name, aspect ratio, or high temperature warning
Startup Screen Select On to display Epson logo at startup
Standby Confirmation Select Off to shut down the projector without displaying the shutdown confirmation prompt when you press the power button on the control panel or on the projector remote control
Operation Various options (see table below) Various options (see table below)
Memory Various options Sets up or saves customized settings to memory
Language Various languages Sets the language for the projector menus and messages
Reset Resets all projector settings, except for the following:
  • Zoom
  • Projection
  • Power On Link
  • Power Off Link
  • Screen Mirroring
  • Energy Save Standby
  • HDMI EQ Setting
  • Memory
  • Language

Operation settings

Options Description
HDMI Link Adjusts HDMI Link options that allow the projector remote control to control HDMI-connected devices that support the CEC standard

Device Connections: lists the device connected to the HDMI port

HDMI Link: turns HDMI Link on or off

Power On Link: controls what happens when you turn on the projector or connected device

Power Off Link: controls if the connected device is turned off or not when you turn off the projector

Screen Mirroring Select On to enable Screen Mirroring.
Screen Mirroring Settings Configures the Screen Mirroring settings (see table below)
Sleep Mode Select On to place the projector in standby mode after a certain interval of inactivity
Sleep Mode Timer Sets the sleep mode interval between 1 and 30 minutes
Illumination Turns off the indicators on the projector
Energy Save Standby Select On to send power to the connected USB device even if the projector is in standby mode (when the power is off).
HDMI EQ Setting Adjusts the signal level of the HDMI input. Change the setting if there is interference with the signal or if there is no image.
Note: If there is no image when using a media streaming device, select 1 as the setting value.

Screen Mirroring Settings

Setting Options Description
Display Name Up to 32 alphanumeric characters Sets the device name shown when searching for the projector
Operation Mode Basic


Select Extended to display additional settings
Adjust Image Quality 1 to 4 Adjusts the quality of the screen mirroring image. Smaller numbers emphasize quality; larger numbers emphasize speed.
Interrupt Connection On


Select On to allow devices to interrupt the screen mirroring connection
Channel Various options Selects the wireless channel used for screen mirroring. Change the setting if you experience interference.
Reset Resets all settings on the Screen Mirroring Settings menu
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use