Correcting Image Shape with Corner Adjustment

You can use the projector's Corner Adjustment feature to correct the shape and size of an image that is unevenly rectangular on all sides.
Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If this isn't possible, use the Corner Adjustment feature to correct the image shape.
  1. Turn on the projector and display an image.
  2. Press the  Auto Keystone button on the remote control. The projector runs through the automatic keystone correction sequence.
    Note: The projector will always run automatic keystone correction when you press the  Auto Keystone button, even if the Auto Keystone setting is turned off.
  3. Select the Corner Adjustment setting. You see the Corner Adjustment screen:


  4. Use the arrow buttons on the remote control to select the point on the image you want to adjust. Then press Enter.
  5. Press the arrow buttons to adjust the image shape as necessary.
    Note: If the direction key on the screen turns gray, you cannot make further adjustments in that direction.
  6. Press the  Esc button on the remote control to return to the point selection screen.
  7. Repeat steps 4-6 to adjust any other points.
  8. When you are finished, press the  Esc button to exit.
You may see a light shadow around the screen or projected image. This is normal.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use