Turning On the Projector

Turn on the projector before you turn on the computer or video equipment you want to use.

Connect the power cord to the projector's power inlet.
Plug the power cord into an electrical outlet.
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
Press the power button on the projector or the On button on the remote control to turn on the projector.
The lens shutter opens and the Status light flashes blue as the projector warms up. Once the projector is warmed up, the Status light stops flashing and turns blue.
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is especially dangerous for children and pets. If you are using the remote control to turn the projector on, make sure no one is looking into the lens or in front of the projector before turning it on.

Caution:

Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction.

If you do not see a projected image right away, try the following:

Turn on the connected computer or video device.
Insert a DVD or other video media and press the play button, if necessary.
Press the Source button on the projector or one of the Source buttons on the remote control.
Change the screen output from the computer when using a laptop.