Using Frame Interpolation

You can use the projector's Frame Interpolation feature to smooth fast-moving video by comparing consecutive image frames and inserting an intermediate image frame between them.

Note: This feature is only available when Image Processing is set to Fine in the projector's Signal I/O menu and 4K 100/120Hz signals are not being projected.

Press the Frame Int button on the remote control.

Note: You can also access this setting from the projector's Image menu.
Select the level of interpolation and press Enter.
Press Menu or Esc to exit the menus.

Note: If your resulting images contain noise, turn off the Frame Interpolation setting.