Using WPS to Connect to a Network

If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.

Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance.

Select the home icon, if necessary.
Select the network icon.
Note: Icon may look different depending on connection status.
Select Router > Start Setup or Change Settings > Push Button Setup (WPS).
Follow the instructions on the LCD screen to complete WPS setup.
Select the home icon to exit. You see the Wi-Fi icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the product software from the Epson website.
Note: If you don't see the Wi-Fi icon, restart the access point, move it closer to the printer, and repeat these steps to try again. If it still does not work, print a network connection report and check the solution.