| Geometry Correction
|
Off
|
Temporarily cancels the geometry correction |
| H/V-Keystone
|
Lets you manually correct the angles of the horizontal
and vertical sides |
| Quick Corner
|
Select to adjust image shape and alignment |
| Curved Surface
|
Select to adjust image on a curved surface |
| Corner Wall
|
Select to adjust image on a curved surface with right
angles |
| Point Correction
|
Select to adjust image projected on a curved
surface |
| Memory
|
Save customized sets of settings to memory.
- Load Memory: You
can load a saved memory
- Save Memory: Saves
the current shape of the image you adjusted
- Erase Memory:
Deletes saved memory
- Rename Memory:
Renames a saved memory
- Reset Memory:
Reset all saved memories
|
| Split Screen
|
— |
Divides the viewing area horizontally and displays two
images side-by-side |
| Volume
|
Varying levels available |
Adjusts the volume of the projector’s speaker system.
You can also adjust the volume of the external speakers |
| HDMI Link
|
Device Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
HDMI Out Settings
|
Adjusts the HDMI Link options that allow the projector
remote to control HDMI-connected devices that support the CEC
standard
Device Connections:
lists the devices connected to the HDMI ports
HDMI Link: enables
or disables the HDMI Link function
Audio Out Device:
selects whether to output audio from the internal speakers or a
connected audio/video system
Power On Link:
controls the projector or a linked device
- PJ -> Device or
Bidirectional: turns on the
linked device when the projector is turned on
- Device -> PJ or
Bidirectional: turns on the
projector when the linked device is turned on
Power Off Link:
control whether linked devices are turned off when the projector is
turned off
HDMI Out Settings:
set when connecting multiple projectors of the same model
- Power On/Off Link:
Set to On to synchronize the
power on/off operation of all projectors projectors
- Terminal End: Set
to On only for the projector at
the end of the daisy chain
|
| Lock Setting
|
Control Panel Lock
|
Controls projector button locking to secure the
projector
Full Lock: locks all
buttons
Partial Lock: locks
all buttons except the power button
Off: no buttons
locked |
| Brightness Settings
|
Light Source Mode
Brightness Level
Constant Brightness
|
Selects the brightness mode of the projector
Light Source Mode:
sets a brightness level (Normal,
Quiet, Extended, Custom)
Brightness Level:
adjusts the brightness when Light Source
Mode is set to Custom
Constant Brightness:
maintains a constant brightness level when Light Source Mode is set to Custom |
| Remote Receiver
|
Front/Rear
Front
Rear
Off
|
Limits reception of remote control signals by the
selected receiver; Off turns off
all receivers |
| User Button
|
Various options available |
Assigns a menu option to the User button on the remote control for
one-touch access |
| Test Pattern
|
— |
Displays a test pattern to assist in adjusting the
image |
| Memory
|
Memory
Geometry Correction
|
Memory: Selects
various memory options on the customized settings
Geometry Correction:
select various memory options on the image shape settings |
| Content Playback
|
Content Playback
Overlay Effect
USB Viewer
|
Plays back a playlist created in the Epson Projector
Content Manager software
Content Playback:
turns Content Playback on or
off
Overlay Effect: adds
color and effects to the projected image when Content Playback is set to On (not available when Edge Blending is set to On)
USB Viewer: selects
a specific playlist from a USB device connected to the projector
when Content Playback is set to
On |
| Reset
|
— |
Resets all the Settings menu settings to their defaults
except the following:
- Audio Out Device
- Power On Link
- Power Off Link
- User Button
- Memory
- Content Playback
- Power On/Off Link
- Terminal End
|
