If the projected image is too dark or light, or the
colors are incorrect, try the following solutions:
- Press the
Color Mode button on the remote
control to try different color modes for the image and
environment.
- Check your
video source settings.
- Adjust the available settings on the Image menu for
the current input source, such as Brightness, Contrast, Tint, Color
Saturation, and RGBCMY.
RGBCMY should be set by a professional color calibrator using
specialized color calibration tools in a controlled lighting
environment.
- Make sure you selected the correct Video Range or EDID setting on the Signal menu, if available
for your image source.
- Make sure
all the cables are securely connected to the projector and your
video device. If you connected long cables, try connecting shorter
cables.
- Make sure
the Brightness Settings options
in the Settings menu are set correctly.
- Position
the projector close enough to the screen.
- When using multiple projectors, make sure
Light Source Calibration in the
Reset menu is set correctly in all of the projectors. If light
source calibration is performed only in some of the projectors, the
white balance and the brightness level of the projected image may
differ between the projectors.