If your product does not appear in the Mac printer
window, try these solutions:
- Turn your
product off, wait 30 seconds, then turn it back on again.
- If you are
connecting the product via Wi-Fi Protected Setup (WPS) and the
Wi-Fi icon on your product's LCD screen is not lit, make sure you
select one of the WPS options from the product control panel within
2 minutes of pressing the WPS button on your router.
- If you are
connecting the product wirelessly via EpsonNet Setup and you do not
see the Wi-Fi antenna icon with connection bars on your LCD screen,
make sure your product software was installed correctly. If
necessary, reinstall your software.