Screen

You can set the aspect ratio and position of the projected image according to the type of screen being used.

Screen Type: Set the aspect ratio of the screen to fit the image into the projection area.
Screen Position: You can shift the image position horizontally and vertically if there are margins between the edge of the image and the projected screen frame due to the Screen Type setting.

Note:

Adjust the aspect ratio for the projected image, if necessary.
When the Screen Type setting changes, the EDID settings are automatically adjusted.
Settings are only displayed when Content Playback is set to Off.
This setting is unavailable when projecting images from a computer over a network.
The Screen Type setting is not supported by the Message Broadcasting feature in the Epson Projector Management software.
You cannot adjust the screen position if you set the Screen Type setting to the same aspect ratio as the projector resolution.
The Screen Position setting is unavailable when Screen Type is set to 16:9.
The Screen Position setting is initialized if you perform Geometry Assist in the Epson Projector Professional Tool, Simple Blending, or Simple Stacking.