- Turn on the projector and display an image.
-
Press the Menu button.
Note: You can also press the Memory button on the remote control. Skip to step 5.
-
Select the Settings menu and press
Enter.
-
Select the Memory setting and press Enter.
Note: You can also access this screen by pressing the Memory button on the remote control.
-
Select one of the following options:
- Memory: Saves or loads various settings; you can save up to 10 different memories
- Lens Position: Saves or loads settings related to the lens, such as the lens shift, focus, zoom, and distortion adjustment settings; you can save up to 10 different memories
- Geometry Correction: Saves or loads any adjustments made in the Geometry Correction setting in the Settings menu; you can save up to 3 different memories
-
Select one of the following options:
- Load Memory: Overwrites your current settings with saved settings
- Save
Memory: Saves your current settings to memory
Note: A memory name that has already been used is indicated by a blue mark. Saving over a previously saved memory overwrites the settings with your current settings.
- Erase Memory: Erases the selected memory settings
- Rename Memory: Renames a saved memory
- Reset
Memory: Resets the name and settings of a saved memory
Note: To reset all saved memories of all types, select Reset All Memories in the Reset menu.
- Press Menu or Esc to exit.
