Settings Menu

Options on the Settings menu let you customize various projector features. Click the links at the end of this section for more information.

Setting	Options	Description
Geometry Correction	See the list of available settings in the table below	Adjusts the image shape to rectangular (horizontally and vertically); after correction, your image is slightly smaller Select Off to temporarily cancel geometry correction. Even when set to Off, the correction values are saved.
Volume	Varying levels available	Adjusts the volume of external speakers connected to the projector's Audio Out port
HDMI Link	Device Connections HDMI Link Audio Out Device Power On Link Power Off Link	Adjusts the HDMI Link options that allow the projector remote to control HDMI-connected devices Set HDMI Link to On to enable the HDMI Link features
Lock Setting	Control Panel Lock Lens Lock	Lets you set up projector security features to deter theft or prevent unintended use Control Panel Lock: controls projector button locking to secure the projector. Select Full Lock to lock all buttons or Partial Lock to lock all buttons except for the On button and the Standby button. Select Off to unlock all buttons. Note: You can also control projector button locking using the lock button on the control panel. To unlock the buttons, hold down the Enter button on the control panel for approximately 7 seconds. A message is displayed and the lock is released. Lens Lock: allows you to lock Lens Shift, Zoom, Focus, Distortion, and Calibration button operations on the remote control.
Remote Receiver	—	When the remote control does not operate stably due to noise from other devices, you can limit reception of remote control signals to the selected receiver Select Off to turn off all receivers. You can turn on all remote receivers by holding down the Menu button on the remote control for about 15 seconds.
User Button	various settings available	Allows you to assign one of the following menu options to the User buttons on the remote control for one-touch access: Display the QR Code Image Enhancement Frame Interpolation Link Menu Content Playback USB Note: The USB option is only displayed when Content Playback is set to On.
Test Pattern	Display Position Color Isolation: R Color Isolation: G Color Isolation: B	Displays a test pattern to assist in focusing and zooming the image and correcting image shape. The color isolation options let you display the selected color component of the projected image. These settings should be set by a professional color calibrator using specialized color calibration tools in a controlled lighting environment. Press the Page button to change the test pattern while displaying a test pattern. Press the Esc button to cancel pattern display. To set menu items that cannot be set while the test pattern is being displayed or to fine-tune the projected image, project an image from the connected device. To display Color Isolation, you need to project an image from the connected video source. You can also display a test pattern using the Test Pattern button on the remote control or the test pattern/down arrow button on the control panel.
Memory	Memory Lens Position Geometry Correction Load Memory Save Memory Erase Memory Rename Memory Reset Memory Settings	Allows you to save customized settings and then select the saved settings whenever you want to use them A memory name that has already been used is indicated by a blue mark. Saving over a previously saved memory overwrites the settings with your current settings. The lens position when a memory is loaded may not completely match the lens position when the memory was saved. If there is a large discrepancy between the lens position, calibrate the lens. You can also open the Memory screen using the Memory button on the remote control.
Content Playback	Content Playback Overlay Effect USB Viewer	Selects playlists and effects for projection Content Playback: set to On to play back a playlist Overlay Effect: adds color and shape effects to the projected image (not available if the current source is USB and there is no playlist being played, or if the current source is USB and a writing error has occurred) USB Viewer: select and play back a playlist saved on the USB flash drive You can use the following methods to create playlists: Using Epson Projector Content Manager on your computer. You can download and install Epson Projector Content Manager from the Epson support site. Using Epson Web Control with a Web browser. Using Epson Creative Projection on iOS devices. You can download Epson Creative Projection from the App Store. Any fees incurred when communicating with the App Store are the responsibility of the customer. When you assign the USB function to the User button on the remote control using the User Button setting in the projector's Settings menu, you can start the playlist by pressing the User button. When there is a timetable assigned, the playlist will play back according to the schedule in the timetable. You can also hold down the Num and numeric buttons to project your favorite playlist. You can set a remote control shortcut key using the software you used to create the playlists.
Reset	—	You can reset all adjustment values on the Settings menu to their default settings, except for the following: Audio Out Device Power On Link Power Off Link User Button Test Pattern

Geometry Correction Settings

The following options are available in the Geometry Correction menu.

Setting	Description
H/V Keystone	Manually corrects distortion in the horizontal and vertical directions independently. If the image aspect is incorrect, adjust the image balance by using V-Balance and H-Balance. You cannot combine with other correction methods.
Quick Corner	Corrects each of the four corners of the projected image independently
Curved Surface	Corrects the corners and sides of an image projected on a curved surface with the same radius Move the lens position to the home position. If a large amount of adjustment is performed, the focus may not be uniform even after making adjustments. If you set the Maintain Aspect Ratio setting to On after correcting the corrections may not be applied. Reset the corrections to their default values or reduce the amount of correction, and try it again. If you change the standard line during correcting, the present settings are reset.
Corner Wall	Corrects the corners and sides of an image projected on a curved surface with right angles Move the lens position to the home position. If a large amount of adjustment is performed, the focus may not be uniform even after making adjustments. We recommend you adjust the image shape based on the point nearest to the center of the screen.
Point Correction	Divides the projected image into a grid and corrects the distortion in 0.5 pixel increments by moving the selected point of intersection in any direction. You can move the points on the grid between 0.5 to 600 pixels in any direction, including outside the projection range. Use the arrow buttons to make the necessary corrections.
Memory	Allows you to save the shape of an image you have adjusted and load it when needed Note: You can also open the Memory screen using the Memory button on the remote control.

Was this page helpful? Yes or No.

Privacy Policy | Your California Privacy Rights | Terms of Use