Correcting Image Shape with H/V-Keystone

You can use the projector's H/V-Keystone setting to correct the shape of an image that is unevenly rectangular on the sides.

Note: You cannot combine H/V-Keystone correction with other image shape correction methods.

Turn on the projector and display an image.
Note: You can also display a test pattern using the Test Pattern button on the remote control or the test pattern/down arrow button on the control panel.
Press the Menu button.
Select the Settings menu and press Enter.
Select the Geometry Correction setting and press Enter.
Note: You can also open the geometric adjustment screen using the Geometry button on the remote control or the Geometry Correction/up arrow button on the control panel.
Select the H/V-Keystone setting and press Enter. Then press Enter again. You see the H/V-Keystone adjustment screen:
Use the arrow buttons on the projector or the remote control to select between vertical and horizontal keystone or balance correction and to adjust the image shape as necessary.
V-Keystone

V-Balance

H-Keystone

H-Balance
When you are finished, press Esc. After correction, your image is slightly smaller.