Correcting Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.

Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If this isn't possible, use the Quick Corner setting to correct the image shape.

Turn on the projector and display an image.
Note: You can also display the pattern by pressing the Test Pattern button on the remote control or the test pattern/down arrow on the control panel.
Press the Menu button.
Select the Settings menu and press Enter.

Note: You can also press the Geometry button on the remote control to display the Geometry Correction screen.
Select the Geometry Correction setting and press Enter.
Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen:
Use the arrow buttons on the projector or remote control to select the corner of the image you want to adjust. Then press Enter.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen. Then select Yes.
Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area selection screen.
When you are finished, press Esc.