You
can correct differences in projected image colors that occur
between different image sources.
Note: These
settings should be set by a professional color calibrator using
specialized color calibration tools in a controlled lighting
environment.
Note: To
optimize the color tone according to the scene and obtain a more
vivid image, adjust the Scene Adaptive
Gamma setting in the projector's Image menu.
- Turn on the projector and switch to the image source you want to use.
- Press the Menu button.
-
Select the Image menu and press
Enter.
- Select Advanced and press Enter
- Select Gamma and press Enter.
The projected image freezes.
- Select and adjust the correction value. When you select a smaller value, you can reduce the overall brightness of the image to make the image sharper. When you select a larger value, the dark areas of images become brighter, but the color saturation for lighter areas may become weaker.
- If you want to make finer
adjustments, select Custom and
press Enter.
- Press the left or right
arrow button to select the tone you want to change, then press the
up or down arrow button to adjust the tone and press Enter.
Note: Select Reset to reset the Gamma settings.
- Press Menu or Esc to exit the menus.
