Reference Guide

Index	Help	Safety

Contents	Glossary

Problem Solver

Initializing the Network Interface

To initialize your network interface, turn on the device, and then plug the power cord of the network interface into a wall outlet while holding down the status sheet button of the network interface for twenty seconds. The length of time necessary to hold down the status sheet button varies depending on the device model. The green USB light flashes, indicating the network interface is being initialized.

After the initialization is complete, press the status sheet button to print a status sheet. Check the information on the status sheet.

Note:

You can also initialize the network interface using EpsonNet Config by clicking the Default Settings button.

[Top]