|
|
Product Information / Technical Specifications
General
Environmental
Mechanical
Electrical
Standards and approvals
Printing method: |
Laser beam scanning and dry electrophotographic process |
Resolution: |
2400 RIT |
Continuous printing speed*1 (on A4/Letter): |
25 pages per minute for black-and-white printing*3 |
First print speed*1: |
9.0 seconds for black-and-white printing on A4 or Letter size paper |
Warm-up time*2: |
About 37.0 seconds at normal temperature |
Paper feed: |
Automatic or manual feed |
Paper feed alignment: |
Center alignment for all sizes |
Input paper supply: |
|
MP tray: |
Up to 180 sheets of plain paper (80 g/m2) |
Paper output: |
For all paper types and sizes |
Paper output capacity: |
Up to 250 sheets of plain paper (80 g/m2) |
RAM: |
128 MB, expandable up to 576 MB |
*1 Printing speed varies by paper source or other conditions. |
*2 Warm-up time varies with optional configurations. |
*3 The product may automatically calibrate during printing to improve printing quality. This may reduce the printing speed to below that of the value described. Also, depending on paper size, the product may stop momentarily to protect the fuser unit. |
Scanner type |
Flatbed color image scanner |
Photoelectric device |
4-lines CCD (R, G, B, B/W) |
Effective area |
216 x 297 mm (85 x 11.7 in.) |
Effective pixels |
5100 x 7020 pixels at 600 dpi |
Document size |
A4, Letter |
Image data |
16 bits per pixel per color internal 1 to 8 bits per pixel per color external |
Scanning speed |
Black and white: 2 sec/A4 (300 dpi) Full color: 11 sec/A4 (300 dpi) |
Copy mode |
Color |
Black and White |
|
A4/ 300 dpi |
A4/ 300 dpi |
||
First coy |
29 sec |
12 sec |
|
Copy speed |
Multi-copy |
5 ppm |
25 ppm |
Continuous copy (ADF) |
5 ppm |
25 ppm |
Supported communications lines |
PSTN (subscriber lines) PBX (independent premises internal lines) |
|
Communication speed |
33600/ 31200/ 28800/ 26400/ 24000/ 21600/ 19200/ 16800/ 14400/ 12000/ 9600/ 7200/ 4800/ 2400 bps |
|
Protocol |
G3, G3ECM |
|
Transmission and reception mode |
Color |
Transmits and receives 8 bits each for RGB |
monochrome |
Transmits and receives 1 bit monochrome |
|
Image compression method |
Color |
JPEG |
monochrome |
MH, MR, MMR |
|
Transmission and reception of scanning line density |
Color |
200 x 200 dpi |
monochrome |
8 x 15.4, 8 x 7.7. 8 x 3.85 dot/mm |
|
Document size |
Color |
A4, Letter, Legal |
monochrome |
A4, Letter, Legal |
|
Print paper size |
Color |
A4, B5, Letter, Legal |
monochrome |
A4, B5, Letter, Legal |
Temperature: |
In use: |
10 to 32°C (50 to 89.6°F) |
Not in use: |
-20 to 40°C (-4 to 104°F) |
|
Humidity: |
In use: |
15 to 80% RH |
Not in use: |
10 to 15%, 80 to 90% RH |
|
Altitude: |
3100 meters (10171 feet) maximum |
a. |
EPSON AcuLaser CX11NF/CX11F: 667 mm (26.2 in.) |
|
EPSON AcuLaser CX11N/CX11: 593 mm (23.4 in.) |
b. |
467 mm (18.4 in.) |
c. |
460 mm (18.1 in.) |
Weight: |
For EPSON AcuLaser CX11NF/CX11F: approx. 33.1 kg (about 73 lb), for EPSON AcuLaser CX11N/CX11: approx. 30.9 kg (about 68.1 lb), excluding the imaging cartridge and photoconductor unit |
Durability |
5 years or 200,000 pages, whichever comes first (under the condition of A4 size, horizontal plain paper) |
|
Base model
Fax model |
Base model
Fax model |
|||
Voltage |
110 V-120 V ± 10% |
220 V-240 V ± 10% |
|||
Rated frequency |
50 Hz / 60 Hz |
50 Hz / 60 Hz |
|||
Rated current |
7.5 A |
4.0 A |
|||
Power consumption |
During printing*1 |
Average |
Color |
189 W |
191 W |
B/W |
287 W |
294 W |
|||
MAX |
740 W |
790 W |
|||
During standby mode |
Average |
49 W |
51 W |
||
Sleep mode*2 |
Up to 16 W |
Up to 18 W |
*1 Includes optional paper cassette unit. |
*2 Completely suspended. Compliant with the Energy Star program. |
U.S. model:
[Printer] |
|
Safety |
UL 60950 |
EMC |
FCC Part15 Subpart B Class B |
[EU-96] |
FCC part 68 |
European model:
[Printer]
EMC Directive 89/336/EEC
[EU-96] Fax modem We, Seiko Epson Corporation, hereby declare that this telecommunications equipment Model EU-96 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in; |
Australian model:
[Printer]
[EU-96] Fax modem |
General warning:
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This product is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the product does not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
Previous |
Next |
Version 1.00E, Copyright © 2003, SEIKO EPSON CORPORATION |