User's Guide

Index	Help	Safety

Contents	Glossary

Installing Options

Optional Paper Cassette Unit

Handling precautions
Installing the optional paper cassette unit
Removing the optional paper cassette unit

For details about the paper types and sizes that you can use with the optional paper cassette unit, see Optional 500-Sheet Paper Cassette Unit. For specifications, see Optional 500-Sheet Paper Cassette Unit.

Handling precautions

Always pay attention to the following handling precautions before installing options:

The product weighs about 33.1 kg (73 lb) for EPSON AcuLaser CX11NF/CX11F, and about 30.9 kg (68.1 lb) for EPSON AcuLaser CX11N/CX11, excluding consumable products. One person should never attempt to lift or carry it alone. Two people should carry the product, lifting it from the positions shown below.

Warning:

The back side of the product is heavier than the front, so prepare for this difference as you lift. If you lift the product incorrectly, you could drop it and cause injury.

Caution:

Before transporting the product, make sure the transportation lock on the left side of the document table is set in the locked position. See Scanner parts.

[Top]

Installing the optional paper cassette unit

Follow the steps below to install the optional paper cassette unit.

Turn the product off and unplug the power cord and interface cable.

Take the optional paper cassette unit out of the cardboard box, then remove the protective originals in the cassette.

Place the optional paper cassette unit where you intend to set up the product. Then, put the product onto the optional paper cassette unit. Align each of the product's corners with those of the unit, then lower the product until it rests securely on the unit.

a. hole
b. projection

Warning:

The back side of the product is heavier than the front, so prepare for this difference as you lift. Two people should lift the product from the correct positions.

Note:

The product and optional paper cassette unit are heavy so it is necessary to carry them separately when you transfer them.

Remove the paper cassette from the optional paper cassette unit.

Note for Windows users:

If EPSON Status Monitor 3 is not installed, you have to make settings manually in the printer driver. See Making Optional Settings.

Reconnect the interface cable and power cord, then turn the product on.

To confirm that the option is installed correctly, print a Status Sheet. See Printing a Status Sheet.

Note for Macintosh users:

When you have attached or removed product options, you need to delete the product using Print Setup Utility (for Mac OS X 10.3 or 10.4) or Print Center (for Mac OS X 10.2 or below), and then re-register the product.

[Top]

Removing the optional paper cassette unit

Perform the installation procedure in reverse.

[Top]