Specifications
Printing
|
Printing method
|
On-demand ink jet
|
|
Nozzle configuration
|
Black: 90 nozzles
Color: 270 nozzles (90 each cartridge: cyan, magenta, yellow)
|
|
Print direction
|
Bidirectional with logic seeking
|
Scanning
|
Scanner type
|
Flatbed color
|
|
Photoelectric device
|
CIS
|
|
Effective pixels
|
10,200 ´ 14,040 pixels at 1200 dpi
|
|
Document size
|
8.5 ´ 11.7 inches (216 ´ 297 mm) US letter or A4 size
|
|
Film type
|
Color negative film
Color positive film (strip)
Color positive film (mount)
Monochrome negative film
|
|
Film scan unit
|
35mm film: maximum 6 images per strip
slides: maximum 4(color positive slides only)
|
|
Scanning resolution
|
1200 dpi (main scan)
2400 dpi with Micro Step Drive (sub scan)
|
|
Output resolution
|
50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
|
|
Scanning speed
|
Approximately 30 msec per line at 1200 dpi (color)
Approximately 10 msec per line at 1200 dpi (monochrome)
|
|
Image data
|
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
|
|
Interface
|
One USB 2.0 Hi-speed or USB 1.1 port
|
|
Light source
|
RGB Three Color LED
|
Paper
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
Single sheets
|
Size
|
A4 (8.3 × 11.7 inches)
A5 (5.8 × 8.3 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
Half-letter (5.5 × 8.5 inches)
Executive (7.3 × 10.5 inches)
4 × 6 inches
5 × 7 inches
3.5 × 5 inches
8 × 10 inches
User Defined up to 8.5 × 44 inches
|
|
Paper type
|
Plain bond paper or special paper distributed by Epson
|
|
Thickness
|
0.003 to 0.004 inch (0.08 to 0.11 mm)
|
|
Weight (for plain bond paper)
|
17 lb (64 g/m²) to 24 lb (90 g/m²)
|
Envelopes
|
Size
|
No. 10 (4.1 × 9.5 inches)
DL (4.3 × 8.7 inches)
C6 (4.5 × 6.4 inches)
132 × 220 mm
|
|
Paper type
|
Plain bond paper
|
|
Thickness
|
0.016 to 0.02 inch (0.40 to 0.52 mm)
|
|
Weight
|
20 lb (75 g/m²) to 24 lb (90 g/m²)
|
Note:
Poor quality paper may reduce the print quality and cause paper jams or other problems. If you have print quality problems, switch to a higher grade paper.
Do not load curled or folded paper.
Use paper only under these conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Printable Area
Single sheets or cards
Envelopes
|
A:
|
The minimum top margin is 0.12" (3.0 mm).
|
|
B-L:
|
The minimum left margin is 0.12" (3.0 mm) for single sheets and index cards. The minimum left margin is 0.20" (5.0 mm) for envelopes.
|
|
B-R:
|
The minimum right margin is 0.12" (3.0 mm) for single sheets and index cards. The minimum right margin is 0.20" (5.0 mm) for envelopes.
|
|
C:
|
The minimum bottom margin is 0.12" (3.0 mm).
|
|
D
|
The minimum bottom margin is 0.78" (20 mm) for envelopes.
|
|
*
|
When printing with the borderless feature, print quality may decline in the expanded area. Before printing large jobs using the borderless setting, print a single sheet to confirm printout quality.
|
Note:
Always load paper into the sheet feeder with the short edge first. Load envelopes flap edge left with the flap side down.
Memory Card Slots
|
Compatible memory cards
|
CompactFlash®
SmartMedia (maximum capacity 128MB)
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
Microdrive
SD (Secure Digital) Card
MultiMediaCard
miniSD card*
xD-Picture Card
xD-Picture Card Type M
|
|
Voltage requirements
|
3.3 v
Maximum current is 500 mA
|
* Adapter required
Memory Card Slot Compatibility
|
CF Type II card slot
|
Compatible with CF+ and CompactFlash Specification 1.4 cards
|
|
SmartMedia card slot
|
Compatible with SmartMedia Standard 2003 cards
|
|
Memory Stick/ MemoryStick PRO card slot
|
Compatible with Memory Stick Standard version 1.3 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.0 cards
|
|
SD/MMC card slot
|
Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 1.0 cards and MultiMediaCard Standard cards
|
|
xD-Picture card Slot
|
Compatible with xD-Picture card Card Specification Version 1.20 Type M
|
Ink Cartridges
|
Color
|
Cyan, magenta, yellow, black
|
|
Cartridge life
|
6 months at 77 °F (25 °C) after opening the package
|
|
Temperature
|
Storage:
-4 to 104 °F (-20 to 40 °C)
1 month at 104 °F (40 °C)
Freezing*: 3.2 °F (-16 °C)
|
|
Dimensions
|
12.7 × 73.4 × 55.3 mm
|
|
Weight
|
Approximately 40 g
|
* Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C).
Caution:
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other products may cause damage to your printer not covered by Epson's warranty.
Do not use an ink cartridge if the date on the package has expired.
Mechanical
|
Paper path
|
Sheet feeder, top entry
|
|
Sheet feeder capacity
|
About 100 sheets at 17 lb (64 g/m²)
|
|
Dimensions
|
Width: 17 inches (432 mm)
Depth: 16.3 inches (413.2 mm)
Height: 7.8 inches (198.8 mm)
(including rubber feet, not including paper support and output tray)
|
|
Weight
|
17.2 lb (7.8 kg) without the ink cartridges
|
Electrical
|
Rated power supply
|
100 - 120 Vac
|
|
Input voltage range
|
90 to 132 V
|
|
Rated frequency
|
50 to 60 Hz
|
|
Rated current
|
0.4 A (0.7 A max)
|
|
Input frequency range
|
49.5 - 60.5 Hz
|
|
Power consumption
|
Approx. 13 W (operating, Standalone copying, ISO10561 Letter Pattern, Plain Paper - Text)
Approx. 6.0 W in low-power mode
Approx. 1.5 W in sleep mode
Approx. 0.2 W in power-off mode
|
Environmental
|
Temperature
|
Operation: 50 to 95 °F (10 to 35 °C)
Storage: -4 to 104 °F (-20 to 40 °C)
1 month at 104 °F (40 °C)
|
|
Humidity
(without condensation)
|
Operation: 20 to 80% RH
Storage*: 5 to 85% RH
|
Standards and Approvals
|
Safety
|
UL 60950
CSA C22.2 No. 60950
|
|
EMC
|
FCC part 15 Subpart B class B
CAN/CSA-CEI/IEC CISPR 22
|
USB Interface
|
Standard
|
Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1, Universal Serial Bus Mass Storage class Bulk-Only Transport Revision 1.0
|
|
Bit rate
|
480 Mbps (High speed device)
|
|
Data encoding
|
NRZI
|
|
Adaptable connector
|
USB Series B
|
|
Recommended cable length
|
Under 2 meters
|
