Reference Guide

Index Help Safety Contents Glossary

Troubleshooting / Problems and Solutions

Scanner Operation Problems

The indicator light does not come on
The scanner does not scan
Pressing the Start button does not start scanning
Pressing the Start button in a Mac OS X environment starts Classic mode
You cannot scan multiple images

Problems you may have while using the scanner often involve the operation of your software and computer. Operation problems usually occur because of:

• Incorrect setup of the interface

• Incorrect setup of your computer or software

• Incorrect operation of your software

See your Start Here poster to confirm that you have set up in the correct way. Also, see the documentation that came with your computer and software for possible solutions.

The indicator light does not come on

Make sure the power cord is plugged into an electrical outlet and the scanner is turned on by pressing the Power button.

If you cannot solve a problem, contact your dealer or a qualified customer support person for assistance.

[Top]

The scanner does not scan

Try one or more of these solutions:

• Wait until the indicator light stays on in green (ready for scanning).

• Your system may not work properly if you use a USB cable other than the one supplied by EPSON. Use the USB cable that came with your scanner.

• The scanner may not work properly when connected to the computer through more than one hub. In this case, connect the scanner directly to the computer's USB port, or through one hub.

[Top]

Pressing the Start button does not start scanning

Try one or more of these solutions:

• For Windows XP users:
  Click the Events tab in your scanner's Properties dialog box and make sure Take no action is not selected. Also, make sure the desired button is selected in the Select an event list box, and Start this program is selected.

• For Windows Me, 98, and 2000 users:
  Click the Events tab in your scanner's Properties dialog box and make sure the Disable device events check box is clear. Also, make sure the desired button is selected in the Scanner events list box, and the desired application in the Send to this application list is selected.

• For Mac OS X users:

• When in Classic mode, the  Start button is disabled. Quit Classic mode.

• Initially, only the user who installed the scanner software can scan using the  Start button. Other users must start EPSON Scanner Monitor in the Applications folder before using the  Start button for the first time. From then on, pressing a button will automatically start the application assigned to it.

[Top]

Pressing the Start button in a Mac OS X environment starts Classic mode

Be sure to install the scanner software in a Mac OS X environment, and not in Classic mode.

[Top]

You cannot scan multiple images

Try one or more of these solutions:

• Position each photo at least 0.8 inch (20 mm) apart from adjacent photos.

• Make sure your application is able to scan multiple images.

[Top]

Previous

Next