|
|
Product Information
To use your printer with a PC
To use your printer with a Macintosh
To use your printer, you need Microsoft® Windows® Millennium Edition, 98, 95, XP, 2000, or NT 4.0, and a shielded, twisted-pair parallel cable. If you want to connect your printer to a USB port, you need a Windows Me, 98, XP, or 2000 pre-installed PC equipped with a USB port, and a shielded USB cable. To connect using IEEE 1394 (FireWire®), you need a PC with a FireWire port running Windows ME, 2000, or XP. Ethernet is supported under all operating systems.
Your computer should also meet the following system requirements:
Minimum system |
Recommended system |
Pentium for Windows 98, 95, and NT 4.0 |
Pentium 4 1.3GHz MHz or higher processor |
32 MB RAM for Windows Me, 98, 95, NT 4.0 |
512 MB RAM or more |
100 MB hard disk space for Windows Me, 98, 95, 2000, and NT 4.0 |
500 MB*1/300 MB*2 or more free disk space (B0) |
VGA monitor |
VGA or better monitor |
![]() | *1 is for graphic data use |
![]() | *2 is for line data use |
Your computer dealer can help you update your system if it does not meet these requirements.
To use this printe with USBr, you need a Power Macintosh® G3, G4, or iMac™ series (System 8.5.1 through 9.x; System 9.2.2 or later recommended). For IEEE 1394 (FireWire®), you should have an iMac DV, G3, or G4 (System 8.6 or later with FireWire Update 2.1 or later). Ethernet connections are supported by the iMac, G3, or G4 series (System 8.5.1 through 9.x; 9.2.2 or later recommended).
Your computer should also meet the following system requirements:
Minimum system |
Recommended system |
256 MB RAM |
512 MB RAM |
8 GB hard disk space |
60 GB hard disk space |
![]() | Note: |
![]() |
|
![]() Previous |
![]() Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |